How to Remove FRP Lock On All Acer Android Devices Using NCK Box

NCK BOX is an excellent tool for removing FRP lock on android devices. In this tutorial, I will discuss how to successfully remove FRP lock on any Acer android devices using NCK BOX.
Before I proceed, it should be noted that this tool only works with Acer devices powered with MTK chipset therefore, other Acer devices powered with Qualcomm or any other chipsets may not work by this tutorial.

Removing FRP Lock On Acer Android Devices Using NCK BOX

1. Download NCK BOX from your ABC Package here on Mediafire or Mega.

2. Download and install MTK Android drivers on your PC. You may use PDanet+ or Install USB VCOMM Drivers from here!Important.

3. Now, locate NCK BOX you downloaded from the step one above. It is compressed in a ZIP file, unzip it and then, install the setup file on your PC and launch it. Launch/Open NCK Box you just installed as Admin.

4. On NCK Box, locate Service tab. From the third (3) pane, Locate FRP and click it. Pay attention to the Warning NCK Box displays and make sure your Acer android device meets up that criteria.
Remove FRP Lock On Acer Android with NCK Box

5. Now, remove battery from your Acer android device and insert it again. If the battery cannot be removed, put off the phone.

6. While NCK Box awaits, connect a compatible USB Cable to your PC and then, the other end to your Acer android device.

7. Almost immediately, if the installed drivers work with your Acer android device, NCK Box should detect the phone and initiate the operation sequence. This should not take more than 5 minutes. When NCK Box is done, your phone will restart and if it doesn't, disconnect the phone and restart the phone by yourself.

8. Congratulations! By now, you should be greeted with your setup screens. Complete the setup and enjoy your phone!

What is FRP Lock?

For informational reasons especially to those that do not know what FRP Lock is or means, a brief note about what FRP Lock is and its meaning should be included here so that you may know how to avoid re-occurrence of the same issue afterwards.

If your Acer android device asks for owners credentials that was used when the phone was first setup. Or, maybe it's demanding for a specific Google account and rejects all the ones you have entered on the phone though the credentials (password and username) entered are correct, then, most likely; your Acer android device has been locked-up to FRP.

Factory Reset Protection, FRP for short, is a security measure embedded on android devices. Starting from Android 4.4.4 or more commonly, Android 5.0 Lollipop, ends up in FRP when you factory-reset the phone. FRP Lock is triggered more commonly when you factory-reset such android device from the recovery or using a PC program.
In essence, FRP is there to protect unauthorised access to such android devices following a Userdata-wipe or Factory-reset operation.

How to Prevent FRP Lock Re-occurrence On your Acer Android Devices

It's simple. To prevent your Acer android device from ending up in FRP-Lock, you simply have to delete or remove any and all Google accounts associated with that device. By these, I mean all the Google accounts that are activated on your Acer android device.
To know how many Google accounts are associated with your Acer android device, go to Settings >> Accounts >> Google. Click on Google and you will be able to see the list of Google accounts already associated with your device.

How to Delete or Remove Google Account On Acer Android Device
1. Go to Settings >> Accounts >> Google.
2. From Google under Accounts, tap on each of the Google accounts listed and then, press/tap the Menu button or iCon.
3. From the options that show up, click Remove Account.
4. Repeat this process for every Google Accounts on your Acer android device until there is none left.

Now, you may peacefully proceed to wiping the userdata or factory-reset your Acer android device.

Recommended:

Xolo QC800 Stock Firmware, Stock ROM Download

Xolo Android Stock ROM Firmware PAC File
This Xolo QC800 Firmware, Stock ROM file can be used with any service tools capable of Flashing Stock ROM file on Xolo Android devices.
Stock firmware are mostly needed to either upgrade your Xolo QC800, downgrade it or, to simply flash the phone to correct certain software issues or malfunctions on the phone. Here on this page I have contained the download link for the complete Xolo QC800, Stock ROM file which can be used to flash factory OS back to your Xolo QC800.

How to Download Stock Firmware and Flash Xolo QC800 with the Stock ROM

1. Download SP Flash Tool from here and install it on your PC. If you don't have MTK Android drivers installed on your PC yet, you must install it too. Download VCOM Drivers here

2. Download your Xolo QC800 firmware, Stock ROM File from here.

3. Open the SP Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate flash_tool.exe application and then; double-click it to lunch the program.

4. Go to the folder where you downloaded the Xolo QC800 Stock ROM and open it. It is compressed in a ZIP File, simply decompress/unzip it onto a folder on your PC.

5. On SP Flash Tool, select Scatter Loading. A window should open. Using the browse button, navigate to the folder where you unzipped the Xolo QC800 stock ROM and then select "MTXXXX-ANDROID-SCATTER", from there. Remember: "xxxx" refers to the MTK version of your phone.

6. Once selected, SP Flash Tool will load all the partitions in the Xolo QC800 stock ROM you downloaded. From the list, mark all the partitions EXCEPT these three (3): Preloader, UserData and CACHE.

7. Now, select Download on SP Flash Tool.

8. Put off your Xolo QC800 or remove battery from it and re-insert the battery again. Connect your Xolo QC800 Mobile Phone to the PC and then tap the Power button once.

9. For few seconds, your Windows PC will install the necessary drivers for the flashing operation and then, the flashing operation will commence promptly.

10. When the flashing operation completes, SP Flash Tool will display a green PASS circle. You may then disconnect your phone from the PC.
CONGRATULATIONS! You have successfully flashed your Xolo QC800 to its factory defaults.
NOTE: if you encounter any errors while flashing your Xolo QC800 using SP Flash Tools, see here: Solutions to All SP Flash Tools Errors: Practical Guides

For Graphical Illustrations on how to flash Xolo android devices, see here: How to Flash Xolo Android Device: Step by Step with Pictures

Also Read:

Video Tutorial: How to Flash All MTK Android Devices Including Xolo QC800



How to Unlock (Network & SIM) Acer Phones Using NCK BOX

NCK BOX is a widely used tool for removing network lock and SIM lock status on many phones brand including Acer. In this tutorial, I will discuss how to Network unlock (SIM Unlock) Acer phones using NCK BOX. This page also contains download link for a fully functional NCK Box (latest version) which you can use for removing network lock and SIM lock on Acer smartphones.

If you have being following ArykTECH, you would probably have learnt how to Network unlock or SIM unlock smartphones including Acer using Avengers Box. NCK Box is much simpler and supports even more phones and more brands.

Network/SIM Unlocking Acer Phones Using NCK BOX

1. Download the latest NCK Dongle/BOX from your ABC Package folder either on Mega or Mediafire. ABC Package is a special phone software repair kit that contains all phone software repair tools including firmwares, flashing and unlocking tools, video tutorials and the likes. For detailed info, see ABC Package page here.

2. Download and install Android USB Debugging and Fastboot drivers on your PC. For MTK Android devices, Install USB VCOM Drivers and SPD Android devices, Install SPD Android Drivers. You may also install PDanet+ or any other universal drivers for Android devices for a good standing.

3. Locate the NCK Box setup you downloaded from step one above. The setup is compressed in a ZIP file, simply decompress it and then, double-click the setup file to install it on your PC.

4. When the installation is complete, launch NCK Dongle/BOX. Preferably, it should be launched as Admin.
Unlock Acer phone with NCK BOX

5. Now, on NCK Box, click on Unlocking tab. From the screen, under Phone Settings, click on the first box. And from the list scroll down to Acer and select it. From the second box, select the model of your Acer smartphone e.g Acer Liquid Z110 and proceed to the next step.

6. Now, enable USB Debugging on your Acer G700-U00 and then, connect your Acer Liquid Z110 to the PC and wait until Windows detects the phone and installs the drivers. When Windows completes the drivers installations, by now, NCK Box should have detected your Acer Liquid Z110 which is connected to the PC.

7. Acer devices can be unlocked in three (3) modes. Either Meta Mode, ADB Mode or Flash Mode -the FLASH MODE is also known as Recovery Mode or BOOT MODE for some. In any case, you will see the list of the modes that is/are supported by your device in the third (3rd) pane on NCK Box. In the case of Acer Liquid Z110, only Meta Mode and ADB Mode are supported by the current/latest NCK Box therefore, you should reboot the phone in Meta mode by clicking Reboot in META and wait few seconds or until the phone is fully rebooted in META mode.
Unlocking Acer Phone with NCK BOX

8. Now, if NCK BOX displays 123456789, the default code, click Direct Unlock. This will unlock the phone straight away. If otherwise, click Read Info on NCK Box. This will read your Acer Liquid Z110 info and displays the Unlock Codes.

9. Now, reboot your Acer Liquid Z110, insert an unsupported SIM Card in the phone. When the phone asks/prompts for the Unlock Code, enter the Unlock Code generated by NCK BOX and press OK.

10. Now, your Acer Liquid Z110 is successfully Network/SIM Unlocked. NOTE: if the unlock was not done, factory reset the phone and restart the process again.

NOTICE:
1. This tutorial complies ONLY with the latest NCK BOX thus, from 2.5.X.X and beyond.
2. This tutorial is specifically for Acer Android devices. If you want specific tutorial for other devices check:
3. Have a software you want us crack for you? Submit it here.
br />For the latest updates on NCK BOX and the download links, see NCK Updates

Xolo X1000 Stock Firmware, Flash File Download

Xolo Android Stock ROM Firmware PAC File
This Xolo X1000 Firmware, PAC file can be used with any service tools capable of Flashing PAC file on SpreadTRUM Android Devices.
Stock firmware are mostly needed to either upgrade or downgrade your Xolo X1000. It can also be needed to simply flash your Xolo android device in order to correct certain software issues or malfunctions on the phone. Here on this page I have contained the download link for the complete Xolo X1000 Stock ROM, PAC file which can be used to flash factory OS back to your Xolo X1000.

How to Download Latest Firmware and Flash Xolo X1000 with this PAC File

1. Download SPD Download Tool from here and install it on your PC. Also, it is a must to install SpreadTRUM Android drivers on your PC. You may Download SpreadTRUM Android Drivers here

2. Download your Xolo X1000, latest firmware pac File from here.

3. Open the SpreadTRUM Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate the SpreadTRUM Upgrade Tool application and then; double-click it to lunch the program.

4. Now, Put off your Xolo X1000 or remove battery from it and re-insert the battery then, connect your Xolo X1000 Mobile Phone to the PC.

5. Now, select the specific STOCK FIRMWARE you downloaded for your Xolo X1000 android device by clicking on the Select Pack icon.

6: As soon as the file is loaded successfully, click on "Download Button" to commence the flashing operation.
NOTE: During the flashing operation, your phone may reboot once or twice. Just leave it and do not interrupt the operation.

7: Once the flashing operation is successfully completed, you will see "Previous Passed" message displayed in green on the SpreadTRUM Flash Tool.
CONGRATULATIONS! You have now successfully flashed your Xolo X1000 android device.

For Graphical Illustration on how to flash Xolo SpreadTRUM android devices, see here: How to Flash Xolo Android Device: Step by Step with Pictures

Also Read:

How to Remove FRP Lock On All Lenovo Android Devices Using NCK Box

NCK BOX is an excellent tool for removing FRP lock on android devices. In this tutorial, I will discuss how to successfully remove FRP lock on any Lenovo android devices using NCK BOX.
Before I proceed, it should be noted that this tool only works with Lenovo devices powered with MTK chipset therefore, other Lenovo devices powered with Qualcomm or any other chipsets may not work by this tutorial.

Removing FRP Lock On Lenovo Android Devices Using NCK BOX

1. Download NCK BOX from your ABC Package here on Mediafire or Mega.

2. Download and install MTK Android drivers on your PC. You may use PDanet+ or Install USB VCOMM Drivers from here!Important.

3. Now, locate NCK BOX you downloaded from the step one above. It is compressed in a ZIP file, unzip it and then, install the setup file on your PC and launch it. Launch/Open NCK Box you just installed as Admin.

4. On NCK Box, locate Service tab. From the third (3) pane, Locate FRP and click it. Pay attention to the Warning NCK Box displays and make sure your Lenovo android device meets up that criteria.
Remove FRP Lock On NCK Box

5. Now, remove battery from your phone and insert it again. If the battery cannot be removed, put off the phone.

6. While NCK Box awaits, connect a compatible USB Cable to your PC and then, the other end to the phone.

7. Almost immediately, NCK Box should detect the phone and initiate the operation sequence. This should not take more than 5 minutes. When NCK Box is done, your phone will restart and if it doesn't, disconnect the phone and restart the phone by yourself.

8. Congratulations! By now, you should be greeted with your setup screens. Complete the setup and enjoy your phone!

What is FRP Lock?

For informational reasons especially to those that do not know what FRP Lock is or means, a brief note about what FRP Lock is and its meaning should be included here so that you may know how to avoid re-occurrence of the same issue afterwards.

If your Lenovo android device asks for owners credentials that was used when the phone was first setup. Or, maybe it's demanding for a specific Google account and rejects all the ones you have entered on the phone though the credentials (password and username) entered are correct, then, most likely; your Lenovo android device has been locked-up to FRP.

Factory Reset Protection, FRP for short, is a security measure embedded on android devices. Starting from Android 4.4.4 or more commonly, Android 5.0 Lollipop, ends up in FRP when you factory-reset the phone. FRP Lock is triggered more commonly when you factory-reset such android device from the recovery or using a PC program.
In essence, FRP is there to protect unauthorised access to such android devices following a Userdata-wipe or Factory-reset operation.

How to Prevent FRP Lock Re-occurrence On your Lenovo Android Devices

It's simple. To prevent your Lenovo android device from ending up in FRP-Lock, you simply have to delete or remove any and all Google accounts associated with that device. By these, I mean all the Google accounts that are activated on your Lenovo android device.
To know how many Google accounts are associated with your Lenovo android device, go to Settings >> Accounts >> Google. Click on Google and you will be able to see the list of Google accounts already associated with your device.

How to Delete or Remove Google Account On Lenovo Android Device
1. Go to Settings >> Accounts >> Google.
2. From Google under Accounts, tap on each of the Google accounts listed and then, press/tap the Menu button or iCon.
3. From the options that show up, click Remove Account.
4. Repeat this process for every Google Accounts on your Lenovo android device until there is none left.

Now, you may peacefully proceed to wiping the user-data or factory-reset your Lenovo android device.

Recommended:

How to Unlock (Network & SIM) Huawei Phones Using NCK Dongle

NCK Dongle/BOX is one of the most fully featured servicing tools for servicing series of smartphones and has been existing since the era of Nokia phones and up to today, NCK BOX is still doing wonderful jobs when it comes to flashing, unlocking (both Network and SIM) unlocks, repairing or changing IMEI of both smartphones and featured phones. Unlike the old times, NCK BOX now supports every China phones in the market and that includes all the popular phones you know. NCK Dongle can Network/SIM unlock several phone brands including Samsung, HTC, Huawei, Alcatel, ZTE, Coolpad, Cubot, Micromax, Orange, BlackBerry and so on.

In this tutorial, I discuss how to Network or SIM unlock your Huawei smartphones using NCK Box. If you have being following ArykTECH, you would probably have learnt how to unlock smartphones using Avengers Box. NCK Box is much simpler and supports even more phones from more brands.

Network/SIM Unlocking Huawei Phones Using NCK BOX

1. Download the latest NCK Dongle/BOX from your ABC Package folder either on Mega or Mediafire. ABC Package is a special phone software repair kit that contains all phone software repair tools including firmwares, flashing and unlocking tools, video tutorials and the likes. For detailed info, see ABC Package page here.

2. Download and install Android USB Debugging and Fastboot drivers on your PC. For MTK Android devices, Install USB VCOM Drivers and SPD Android devices, Install SPD Android Drivers. You may also install PDanet+ or any other universal drivers for Android devices for a good standing.

3. Locate the NCK Box setup you downloaded from step one above. The setup is compressed in a ZIP file, simply decompress it and then, double-click the setup file to install it on your PC.

4. When the installation is complete, launch NCK Dongle/BOX. Preferably, it should be launched as Admin.
Unlock Huawei phone with NCK BOX

5. Now, on NCK Box, click on Unlocking tab. From the screen, under Phone Settings, click on the first box. And from the list scroll down to Huawei and select it. From the second box, select the model of your Huawei smartphone e.g Huawei Ascend G700-U00 and proceed to the next step.

6. Now, enable USB Debugging on your Huawei G700-U00 and then, connect your Huawei Ascend G700-U00 to the PC and wait until Windows detects the phone and installs the drivers. When Windows completes the drivers installations, by now, NCK Box should have detected your Huawei Ascend G700-U00.

7. Huawei devices can be unlocked in two (2) modes. Either Meta Mode or Flash Mode -the FLASH MODE is also known as Recovery Mode or BOOT MODE for some. In any case, you will see the list of the modes that is/are supported by your device in the third (3rd) pane on NCK Box. In the case of Huawei Ascend G700-U00, only Meta Mode is supported by the current/latest NCK Box therefore, you should reboot the phone in Meta mode by clicking Reboot in META and wait few seconds or until the phone is fully rebooted in META mode.
Unlocking Huawei Phone with NCK BOX

8. Now, if NCK BOX displays 123456789, the default code, click Direct Unlock. This will unlock the phone straight away. If otherwise, click Read Info on NCK Box. This will read your Huawei Ascend G700-U00 info and displays the Unlock Codes.

9. Now, reboot your Huawei Ascend G700-U00, insert an unsupported SIM Card in the phone. When the phone asks/prompts for the Unlock Code, enter the Unlock Code generated by NCK BOX and press OK.

10. Now, your Huawei Ascend G700-U00 is successfully Network/SIM Unlocked. NOTE: if the unlock was not done, factory reset the phone and restart the process again.

NOTICE:
1. This tutorial complies ONLY with the latest NCK BOX thus, from 2.5.X.X and beyond.
2. This tutorial is specifically for Huawei Android devices. If you want specific tutorial for other devices check:
3. To have access to the ABC Package folder, a compulsory donation of 20USD is required via PayPal, Bitcoin or Payoneer. For Bitcoin and Payoneer details, please Contact Us here.
4. Have a software you want us crack for you? Submit it here.

For the latest updates on NCK BOX and the download links, see NCK Updates

Miracle Box Free Download: All Versions

MiracleBox is a super-utility and servicing tool for android devices. With Miracle Box, you can perform a host of miracles on your android devices. These miracles include the possibility to flash, upgrade, downgrade, wipe User Data, remove FRP (also known as Factory Reset Protection) amongst others. You can even make a dump file of all android devices firmware using Miracle Box however, such android device's chipset has to be supported by Miracle Box version you are using.
...And every dump file you make using Miracle Box can be used to flash stock ROM back on any android device of the same make, model and variant as the device from which you made that dump file.

Since Miracle is a Super-Utility, android users especially, those that hnadle servicing of android devices prefers Miracle Box, I have contained the download link to all available (within ArykTECH) versions of Miracle Box on this page. To download your prefered version of Miracle Box cracked version, you should proceed to the download section below this page.

How to Flash MTK Android Devices Using Miracle Box

1. Download Miracle Box from the download section below here.

2. Extract the Miracle Box ZIP File onto a folder on your PC.

3. Locate Miracle Box loader.exe from within the Miracle Box folder you extracted earlier and then, launch it by Double-Clicking the loader.exe (Preferably, launch it as admin).

4. Wait till MiracleBox opens and the Dashboard is fully loaded.

5. Click the MTK Tab and then, Tick/Mark write.

6. Select the phone's chipset from the dropdown menu e.g MT6589

7. Now, a folder () icon should be visible. Click it.

8. In the Windows that opens, browse or navigate to the folder where you have the Stock ROM (Miracle Dump file) firmware for the MTK Android device you wish to flash and select the firmware.

9. Click the Start button.

10. Switch off the phone (with charged battery inside it) then, connect the phone to the PC via USB Cable. Wait until Miracle Box detect the phone. Don't worry! It's almost instant.

11. Now, Miracle Box should begin flashing the firmware. All you have to do is wait until it reaches 100%.

12. Once it gets to 100%, close Miracle Box and disconnect the phone from the PC.

By now, you have successfully flashed stock ROM on your MTK Android device using Miracle Box.

How to Flash Spreadtrum Android Device Using Miracle Box

1. Download Miracle Box from the download section below here.

2. Extract the Miracle Box ZIP File onto a folder on your PC.

3. Locate Miracle Box loader.exe from within the Miracle Box folder you extracted earlier and then, launch it by Double-Clicking the loader.exe (Preferably, launch it as admin).

4. Wait till MiracleBox opens and the Dashboard is fully loaded.

5. Click the SPD (Spreadtrum) Tab and then, Tick/Mark write.

6. Select the phone's chipset from the dropdown menu e.g SPD***

7. Now, a folder () icon should be visible. Click it.

8. In the Windows that opens, browse or navigate to the folder where you have the Stock ROM (Miracle Dump file) firmware for the Spreadtrum Android device you wish to flash and select the firmware.

9. Click the Start button.

10.Now, Switch off the phone (with charged battery inside it) then, connect the phone to the PC via USB Cable. Wait until Miracle Box detect the phone. Don't worry! It's almost instant. If Miracle Box fails to detect the phone, Tap the phone's -Vol, +Vol button once.

11. Now, Miracle Box should begin flashing the firmware. All you have to do is wait until it reaches 100%. With Spreadtrum android devices, the flashing operation is usually between 5 minutes and 15 minutes using Miracle Box.

12. Once it gets to 100%, close Miracle Box and disconnect the phone from the PC.

By now, you have successfully flashed stock ROM on your Spreadtrum Android device using Miracle Box.

Download Cracked Miracle Box: All Versions

Miracle Box v2.27 | File Size: 86.9MB
Miracle Box v2.27 (Eagle Eye) | File Size : 91.1MB

Note:
I have taken cautions at explaining the how to use Miracle Box. It is your duty to take every necessary cautions from your end as well. If you have issues at using Miracle Box, contact ArykTECH here for help.