How to Remove FRP Lock On All Acer Android Devices Using NCK Box

NCK BOX is an excellent tool for removing FRP lock on android devices. In this tutorial, I will discuss how to successfully remove FRP lock on any Acer android devices using NCK BOX.
Before I proceed, it should be noted that this tool only works with Acer devices powered with MTK chipset therefore, other Acer devices powered with Qualcomm or any other chipsets may not work by this tutorial.

Removing FRP Lock On Acer Android Devices Using NCK BOX

1. Download NCK BOX from your ABC Package here on Mediafire or Mega.

2. Download and install MTK Android drivers on your PC. You may use PDanet+ or Install USB VCOMM Drivers from here!Important.

3. Now, locate NCK BOX you downloaded from the step one above. It is compressed in a ZIP file, unzip it and then, install the setup file on your PC and launch it. Launch/Open NCK Box you just installed as Admin.

4. On NCK Box, locate Service tab. From the third (3) pane, Locate FRP and click it. Pay attention to the Warning NCK Box displays and make sure your Acer android device meets up that criteria.
Remove FRP Lock On Acer Android with NCK Box

5. Now, remove battery from your Acer android device and insert it again. If the battery cannot be removed, put off the phone.

6. While NCK Box awaits, connect a compatible USB Cable to your PC and then, the other end to your Acer android device.

7. Almost immediately, if the installed drivers work with your Acer android device, NCK Box should detect the phone and initiate the operation sequence. This should not take more than 5 minutes. When NCK Box is done, your phone will restart and if it doesn't, disconnect the phone and restart the phone by yourself.

8. Congratulations! By now, you should be greeted with your setup screens. Complete the setup and enjoy your phone!

What is FRP Lock?

For informational reasons especially to those that do not know what FRP Lock is or means, a brief note about what FRP Lock is and its meaning should be included here so that you may know how to avoid re-occurrence of the same issue afterwards.

If your Acer android device asks for owners credentials that was used when the phone was first setup. Or, maybe it's demanding for a specific Google account and rejects all the ones you have entered on the phone though the credentials (password and username) entered are correct, then, most likely; your Acer android device has been locked-up to FRP.

Factory Reset Protection, FRP for short, is a security measure embedded on android devices. Starting from Android 4.4.4 or more commonly, Android 5.0 Lollipop, ends up in FRP when you factory-reset the phone. FRP Lock is triggered more commonly when you factory-reset such android device from the recovery or using a PC program.
In essence, FRP is there to protect unauthorised access to such android devices following a Userdata-wipe or Factory-reset operation.

How to Prevent FRP Lock Re-occurrence On your Acer Android Devices

It's simple. To prevent your Acer android device from ending up in FRP-Lock, you simply have to delete or remove any and all Google accounts associated with that device. By these, I mean all the Google accounts that are activated on your Acer android device.
To know how many Google accounts are associated with your Acer android device, go to Settings >> Accounts >> Google. Click on Google and you will be able to see the list of Google accounts already associated with your device.

How to Delete or Remove Google Account On Acer Android Device
1. Go to Settings >> Accounts >> Google.
2. From Google under Accounts, tap on each of the Google accounts listed and then, press/tap the Menu button or iCon.
3. From the options that show up, click Remove Account.
4. Repeat this process for every Google Accounts on your Acer android device until there is none left.

Now, you may peacefully proceed to wiping the userdata or factory-reset your Acer android device.

Recommended:

Xolo QC800 Stock Firmware, Stock ROM Download

Xolo Android Stock ROM Firmware PAC File
This Xolo QC800 Firmware, Stock ROM file can be used with any service tools capable of Flashing Stock ROM file on Xolo Android devices.
Stock firmware are mostly needed to either upgrade your Xolo QC800, downgrade it or, to simply flash the phone to correct certain software issues or malfunctions on the phone. Here on this page I have contained the download link for the complete Xolo QC800, Stock ROM file which can be used to flash factory OS back to your Xolo QC800.

How to Download Stock Firmware and Flash Xolo QC800 with the Stock ROM

1. Download SP Flash Tool from here and install it on your PC. If you don't have MTK Android drivers installed on your PC yet, you must install it too. Download VCOM Drivers here

2. Download your Xolo QC800 firmware, Stock ROM File from here.

3. Open the SP Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate flash_tool.exe application and then; double-click it to lunch the program.

4. Go to the folder where you downloaded the Xolo QC800 Stock ROM and open it. It is compressed in a ZIP File, simply decompress/unzip it onto a folder on your PC.

5. On SP Flash Tool, select Scatter Loading. A window should open. Using the browse button, navigate to the folder where you unzipped the Xolo QC800 stock ROM and then select "MTXXXX-ANDROID-SCATTER", from there. Remember: "xxxx" refers to the MTK version of your phone.

6. Once selected, SP Flash Tool will load all the partitions in the Xolo QC800 stock ROM you downloaded. From the list, mark all the partitions EXCEPT these three (3): Preloader, UserData and CACHE.

7. Now, select Download on SP Flash Tool.

8. Put off your Xolo QC800 or remove battery from it and re-insert the battery again. Connect your Xolo QC800 Mobile Phone to the PC and then tap the Power button once.

9. For few seconds, your Windows PC will install the necessary drivers for the flashing operation and then, the flashing operation will commence promptly.

10. When the flashing operation completes, SP Flash Tool will display a green PASS circle. You may then disconnect your phone from the PC.
CONGRATULATIONS! You have successfully flashed your Xolo QC800 to its factory defaults.
NOTE: if you encounter any errors while flashing your Xolo QC800 using SP Flash Tools, see here: Solutions to All SP Flash Tools Errors: Practical Guides

For Graphical Illustrations on how to flash Xolo android devices, see here: How to Flash Xolo Android Device: Step by Step with Pictures

Also Read:

Video Tutorial: How to Flash All MTK Android Devices Including Xolo QC800



How to Unlock (Network & SIM) Acer Phones Using NCK BOX

NCK BOX is a widely used tool for removing network lock and SIM lock status on many phones brand including Acer. In this tutorial, I will discuss how to Network unlock (SIM Unlock) Acer phones using NCK BOX. This page also contains download link for a fully functional NCK Box (latest version) which you can use for removing network lock and SIM lock on Acer smartphones.

If you have being following ArykTECH, you would probably have learnt how to Network unlock or SIM unlock smartphones including Acer using Avengers Box. NCK Box is much simpler and supports even more phones and more brands.

Network/SIM Unlocking Acer Phones Using NCK BOX

1. Download the latest NCK Dongle/BOX from your ABC Package folder either on Mega or Mediafire. ABC Package is a special phone software repair kit that contains all phone software repair tools including firmwares, flashing and unlocking tools, video tutorials and the likes. For detailed info, see ABC Package page here.

2. Download and install Android USB Debugging and Fastboot drivers on your PC. For MTK Android devices, Install USB VCOM Drivers and SPD Android devices, Install SPD Android Drivers. You may also install PDanet+ or any other universal drivers for Android devices for a good standing.

3. Locate the NCK Box setup you downloaded from step one above. The setup is compressed in a ZIP file, simply decompress it and then, double-click the setup file to install it on your PC.

4. When the installation is complete, launch NCK Dongle/BOX. Preferably, it should be launched as Admin.
Unlock Acer phone with NCK BOX

5. Now, on NCK Box, click on Unlocking tab. From the screen, under Phone Settings, click on the first box. And from the list scroll down to Acer and select it. From the second box, select the model of your Acer smartphone e.g Acer Liquid Z110 and proceed to the next step.

6. Now, enable USB Debugging on your Acer G700-U00 and then, connect your Acer Liquid Z110 to the PC and wait until Windows detects the phone and installs the drivers. When Windows completes the drivers installations, by now, NCK Box should have detected your Acer Liquid Z110 which is connected to the PC.

7. Acer devices can be unlocked in three (3) modes. Either Meta Mode, ADB Mode or Flash Mode -the FLASH MODE is also known as Recovery Mode or BOOT MODE for some. In any case, you will see the list of the modes that is/are supported by your device in the third (3rd) pane on NCK Box. In the case of Acer Liquid Z110, only Meta Mode and ADB Mode are supported by the current/latest NCK Box therefore, you should reboot the phone in Meta mode by clicking Reboot in META and wait few seconds or until the phone is fully rebooted in META mode.
Unlocking Acer Phone with NCK BOX

8. Now, if NCK BOX displays 123456789, the default code, click Direct Unlock. This will unlock the phone straight away. If otherwise, click Read Info on NCK Box. This will read your Acer Liquid Z110 info and displays the Unlock Codes.

9. Now, reboot your Acer Liquid Z110, insert an unsupported SIM Card in the phone. When the phone asks/prompts for the Unlock Code, enter the Unlock Code generated by NCK BOX and press OK.

10. Now, your Acer Liquid Z110 is successfully Network/SIM Unlocked. NOTE: if the unlock was not done, factory reset the phone and restart the process again.

NOTICE:
1. This tutorial complies ONLY with the latest NCK BOX thus, from 2.5.X.X and beyond.
2. This tutorial is specifically for Acer Android devices. If you want specific tutorial for other devices check:
3. Have a software you want us crack for you? Submit it here.
br />For the latest updates on NCK BOX and the download links, see NCK Updates

Xolo X1000 Stock Firmware, Flash File Download

Xolo Android Stock ROM Firmware PAC File
This Xolo X1000 Firmware, PAC file can be used with any service tools capable of Flashing PAC file on SpreadTRUM Android Devices.
Stock firmware are mostly needed to either upgrade or downgrade your Xolo X1000. It can also be needed to simply flash your Xolo android device in order to correct certain software issues or malfunctions on the phone. Here on this page I have contained the download link for the complete Xolo X1000 Stock ROM, PAC file which can be used to flash factory OS back to your Xolo X1000.

How to Download Latest Firmware and Flash Xolo X1000 with this PAC File

1. Download SPD Download Tool from here and install it on your PC. Also, it is a must to install SpreadTRUM Android drivers on your PC. You may Download SpreadTRUM Android Drivers here

2. Download your Xolo X1000, latest firmware pac File from here.

3. Open the SpreadTRUM Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate the SpreadTRUM Upgrade Tool application and then; double-click it to lunch the program.

4. Now, Put off your Xolo X1000 or remove battery from it and re-insert the battery then, connect your Xolo X1000 Mobile Phone to the PC.

5. Now, select the specific STOCK FIRMWARE you downloaded for your Xolo X1000 android device by clicking on the Select Pack icon.

6: As soon as the file is loaded successfully, click on "Download Button" to commence the flashing operation.
NOTE: During the flashing operation, your phone may reboot once or twice. Just leave it and do not interrupt the operation.

7: Once the flashing operation is successfully completed, you will see "Previous Passed" message displayed in green on the SpreadTRUM Flash Tool.
CONGRATULATIONS! You have now successfully flashed your Xolo X1000 android device.

For Graphical Illustration on how to flash Xolo SpreadTRUM android devices, see here: How to Flash Xolo Android Device: Step by Step with Pictures

Also Read:

How to Remove FRP Lock On All Lenovo Android Devices Using NCK Box

NCK BOX is an excellent tool for removing FRP lock on android devices. In this tutorial, I will discuss how to successfully remove FRP lock on any Lenovo android devices using NCK BOX.
Before I proceed, it should be noted that this tool only works with Lenovo devices powered with MTK chipset therefore, other Lenovo devices powered with Qualcomm or any other chipsets may not work by this tutorial.

Removing FRP Lock On Lenovo Android Devices Using NCK BOX

1. Download NCK BOX from your ABC Package here on Mediafire or Mega.

2. Download and install MTK Android drivers on your PC. You may use PDanet+ or Install USB VCOMM Drivers from here!Important.

3. Now, locate NCK BOX you downloaded from the step one above. It is compressed in a ZIP file, unzip it and then, install the setup file on your PC and launch it. Launch/Open NCK Box you just installed as Admin.

4. On NCK Box, locate Service tab. From the third (3) pane, Locate FRP and click it. Pay attention to the Warning NCK Box displays and make sure your Lenovo android device meets up that criteria.
Remove FRP Lock On NCK Box

5. Now, remove battery from your phone and insert it again. If the battery cannot be removed, put off the phone.

6. While NCK Box awaits, connect a compatible USB Cable to your PC and then, the other end to the phone.

7. Almost immediately, NCK Box should detect the phone and initiate the operation sequence. This should not take more than 5 minutes. When NCK Box is done, your phone will restart and if it doesn't, disconnect the phone and restart the phone by yourself.

8. Congratulations! By now, you should be greeted with your setup screens. Complete the setup and enjoy your phone!

What is FRP Lock?

For informational reasons especially to those that do not know what FRP Lock is or means, a brief note about what FRP Lock is and its meaning should be included here so that you may know how to avoid re-occurrence of the same issue afterwards.

If your Lenovo android device asks for owners credentials that was used when the phone was first setup. Or, maybe it's demanding for a specific Google account and rejects all the ones you have entered on the phone though the credentials (password and username) entered are correct, then, most likely; your Lenovo android device has been locked-up to FRP.

Factory Reset Protection, FRP for short, is a security measure embedded on android devices. Starting from Android 4.4.4 or more commonly, Android 5.0 Lollipop, ends up in FRP when you factory-reset the phone. FRP Lock is triggered more commonly when you factory-reset such android device from the recovery or using a PC program.
In essence, FRP is there to protect unauthorised access to such android devices following a Userdata-wipe or Factory-reset operation.

How to Prevent FRP Lock Re-occurrence On your Lenovo Android Devices

It's simple. To prevent your Lenovo android device from ending up in FRP-Lock, you simply have to delete or remove any and all Google accounts associated with that device. By these, I mean all the Google accounts that are activated on your Lenovo android device.
To know how many Google accounts are associated with your Lenovo android device, go to Settings >> Accounts >> Google. Click on Google and you will be able to see the list of Google accounts already associated with your device.

How to Delete or Remove Google Account On Lenovo Android Device
1. Go to Settings >> Accounts >> Google.
2. From Google under Accounts, tap on each of the Google accounts listed and then, press/tap the Menu button or iCon.
3. From the options that show up, click Remove Account.
4. Repeat this process for every Google Accounts on your Lenovo android device until there is none left.

Now, you may peacefully proceed to wiping the user-data or factory-reset your Lenovo android device.

Recommended:

How to Unlock (Network & SIM) Huawei Phones Using NCK Dongle

NCK Dongle/BOX is one of the most fully featured servicing tools for servicing series of smartphones and has been existing since the era of Nokia phones and up to today, NCK BOX is still doing wonderful jobs when it comes to flashing, unlocking (both Network and SIM) unlocks, repairing or changing IMEI of both smartphones and featured phones. Unlike the old times, NCK BOX now supports every China phones in the market and that includes all the popular phones you know. NCK Dongle can Network/SIM unlock several phone brands including Samsung, HTC, Huawei, Alcatel, ZTE, Coolpad, Cubot, Micromax, Orange, BlackBerry and so on.

In this tutorial, I discuss how to Network or SIM unlock your Huawei smartphones using NCK Box. If you have being following ArykTECH, you would probably have learnt how to unlock smartphones using Avengers Box. NCK Box is much simpler and supports even more phones from more brands.

Network/SIM Unlocking Huawei Phones Using NCK BOX

1. Download the latest NCK Dongle/BOX from your ABC Package folder either on Mega or Mediafire. ABC Package is a special phone software repair kit that contains all phone software repair tools including firmwares, flashing and unlocking tools, video tutorials and the likes. For detailed info, see ABC Package page here.

2. Download and install Android USB Debugging and Fastboot drivers on your PC. For MTK Android devices, Install USB VCOM Drivers and SPD Android devices, Install SPD Android Drivers. You may also install PDanet+ or any other universal drivers for Android devices for a good standing.

3. Locate the NCK Box setup you downloaded from step one above. The setup is compressed in a ZIP file, simply decompress it and then, double-click the setup file to install it on your PC.

4. When the installation is complete, launch NCK Dongle/BOX. Preferably, it should be launched as Admin.
Unlock Huawei phone with NCK BOX

5. Now, on NCK Box, click on Unlocking tab. From the screen, under Phone Settings, click on the first box. And from the list scroll down to Huawei and select it. From the second box, select the model of your Huawei smartphone e.g Huawei Ascend G700-U00 and proceed to the next step.

6. Now, enable USB Debugging on your Huawei G700-U00 and then, connect your Huawei Ascend G700-U00 to the PC and wait until Windows detects the phone and installs the drivers. When Windows completes the drivers installations, by now, NCK Box should have detected your Huawei Ascend G700-U00.

7. Huawei devices can be unlocked in two (2) modes. Either Meta Mode or Flash Mode -the FLASH MODE is also known as Recovery Mode or BOOT MODE for some. In any case, you will see the list of the modes that is/are supported by your device in the third (3rd) pane on NCK Box. In the case of Huawei Ascend G700-U00, only Meta Mode is supported by the current/latest NCK Box therefore, you should reboot the phone in Meta mode by clicking Reboot in META and wait few seconds or until the phone is fully rebooted in META mode.
Unlocking Huawei Phone with NCK BOX

8. Now, if NCK BOX displays 123456789, the default code, click Direct Unlock. This will unlock the phone straight away. If otherwise, click Read Info on NCK Box. This will read your Huawei Ascend G700-U00 info and displays the Unlock Codes.

9. Now, reboot your Huawei Ascend G700-U00, insert an unsupported SIM Card in the phone. When the phone asks/prompts for the Unlock Code, enter the Unlock Code generated by NCK BOX and press OK.

10. Now, your Huawei Ascend G700-U00 is successfully Network/SIM Unlocked. NOTE: if the unlock was not done, factory reset the phone and restart the process again.

NOTICE:
1. This tutorial complies ONLY with the latest NCK BOX thus, from 2.5.X.X and beyond.
2. This tutorial is specifically for Huawei Android devices. If you want specific tutorial for other devices check:
3. To have access to the ABC Package folder, a compulsory donation of 20USD is required via PayPal, Bitcoin or Payoneer. For Bitcoin and Payoneer details, please Contact Us here.
4. Have a software you want us crack for you? Submit it here.

For the latest updates on NCK BOX and the download links, see NCK Updates

Miracle Box Free Download: All Versions

MiracleBox is a super-utility and servicing tool for android devices. With Miracle Box, you can perform a host of miracles on your android devices. These miracles include the possibility to flash, upgrade, downgrade, wipe User Data, remove FRP (also known as Factory Reset Protection) amongst others. You can even make a dump file of all android devices firmware using Miracle Box however, such android device's chipset has to be supported by Miracle Box version you are using.
...And every dump file you make using Miracle Box can be used to flash stock ROM back on any android device of the same make, model and variant as the device from which you made that dump file.

Since Miracle is a Super-Utility, android users especially, those that hnadle servicing of android devices prefers Miracle Box, I have contained the download link to all available (within ArykTECH) versions of Miracle Box on this page. To download your prefered version of Miracle Box cracked version, you should proceed to the download section below this page.

How to Flash MTK Android Devices Using Miracle Box

1. Download Miracle Box from the download section below here.

2. Extract the Miracle Box ZIP File onto a folder on your PC.

3. Locate Miracle Box loader.exe from within the Miracle Box folder you extracted earlier and then, launch it by Double-Clicking the loader.exe (Preferably, launch it as admin).

4. Wait till MiracleBox opens and the Dashboard is fully loaded.

5. Click the MTK Tab and then, Tick/Mark write.

6. Select the phone's chipset from the dropdown menu e.g MT6589

7. Now, a folder () icon should be visible. Click it.

8. In the Windows that opens, browse or navigate to the folder where you have the Stock ROM (Miracle Dump file) firmware for the MTK Android device you wish to flash and select the firmware.

9. Click the Start button.

10. Switch off the phone (with charged battery inside it) then, connect the phone to the PC via USB Cable. Wait until Miracle Box detect the phone. Don't worry! It's almost instant.

11. Now, Miracle Box should begin flashing the firmware. All you have to do is wait until it reaches 100%.

12. Once it gets to 100%, close Miracle Box and disconnect the phone from the PC.

By now, you have successfully flashed stock ROM on your MTK Android device using Miracle Box.

How to Flash Spreadtrum Android Device Using Miracle Box

1. Download Miracle Box from the download section below here.

2. Extract the Miracle Box ZIP File onto a folder on your PC.

3. Locate Miracle Box loader.exe from within the Miracle Box folder you extracted earlier and then, launch it by Double-Clicking the loader.exe (Preferably, launch it as admin).

4. Wait till MiracleBox opens and the Dashboard is fully loaded.

5. Click the SPD (Spreadtrum) Tab and then, Tick/Mark write.

6. Select the phone's chipset from the dropdown menu e.g SPD***

7. Now, a folder () icon should be visible. Click it.

8. In the Windows that opens, browse or navigate to the folder where you have the Stock ROM (Miracle Dump file) firmware for the Spreadtrum Android device you wish to flash and select the firmware.

9. Click the Start button.

10.Now, Switch off the phone (with charged battery inside it) then, connect the phone to the PC via USB Cable. Wait until Miracle Box detect the phone. Don't worry! It's almost instant. If Miracle Box fails to detect the phone, Tap the phone's -Vol, +Vol button once.

11. Now, Miracle Box should begin flashing the firmware. All you have to do is wait until it reaches 100%. With Spreadtrum android devices, the flashing operation is usually between 5 minutes and 15 minutes using Miracle Box.

12. Once it gets to 100%, close Miracle Box and disconnect the phone from the PC.

By now, you have successfully flashed stock ROM on your Spreadtrum Android device using Miracle Box.

Download Cracked Miracle Box: All Versions

Miracle Box v2.27 | File Size: 86.9MB
Miracle Box v2.27 (Eagle Eye) | File Size : 91.1MB

Note:
I have taken cautions at explaining the how to use Miracle Box. It is your duty to take every necessary cautions from your end as well. If you have issues at using Miracle Box, contact ArykTECH here for help.

Avengers Box Free Download: All Versions

Avengers Cracked Version for Unlocking Network/SIM Locked Phones
Download (Free and Cracked) Avengers Box for your Phone's Network/SIM Lock Solution
Avengers Box is one of the most respected tool that provides solutions for smartphone's SIM/Network unlock. With full supports for Huawe Android, Huawei Modem, Samsung Android, Samsung Generic, Alcatel Android, Coolpad, Orange, ZTE Android, ZTE Modem and Vodafone, you can be sure that Avengers Box will remove all network restrictions on all the phones and modems made by the aforementioned supported brands.

What is Network Lock or SIM Lock?

When a particular device is Network locked or SIM locked, such device cannot be used with any other network other than the network that particular device is locked to. In essence, if your phone or modem is locked to a particular network or service provider, you may not be able to use it until it is unlocked either by the service provider or by means of tools such as Avengers box that can network or SIM unlock various smartphones and modems.

How to Network Unlock or SIM Unlock A Phone or Modem with Avengers Box

1. Download Avengers Box from here.

2. Unzip the Avengers Box you downloaded onto a folder on your PC.
3. Open the folder to locate Avengers Box Loader. It is a must that you launch it with ADMIN privileges.

4. Right under the Main tab, select your phone or modem Brand and then, select your Model right below it.

5. At the Action tab, select Unlock Device. A dialogue box will appear. Read the info on the screen and make sure that it is correct then, proceed.

6. Wait few minutes or until the operation is successfully completed and then, disconnect your phone from the PC.

7. Congratulations! You have just successfully unlocked your phone or modem with Avengers Box.

What Can you Do with Avengers Box?

1. Perform direct Network/SIM Unlock of supported models from the listed brands.
2. Avengers Box can enhance flashing of firmwares.
3. Avengers Box can repair software.
4. You can use Avengers Box to write IMEI on ZTE modems.
5. It can calculate unlock codes both online and offline.

List of Supported Brands By Avengers
1. Alcatel
2. Coolpad
3. Huawei Android
4. Huawei Modem
5. Orange
6. Samsung Android
7. Samsung Generic
8. Vodafone
9. ZTE Android
10. ZTE Modem

DOWNLOAD SECTION
Download Avengers Box
This page is basically for ArykTECH A B C Package bearers. Learn more about A B C Package here and gain access to all phone software repair tools.
Want a PREMIUM SOFTWARE free? Submit it here! We will crack it for you.
Donate to support future cracked softwares!

How to Submit A Software to ArykTECH and Get its CRACK Version

Basically, ArykTECH provides cracked versions of phones service tools but if you have any software that is needed either for persional use or for your business and the cost of that program is somewhat heavy for you to afford, you may submit the software to ArykTECH and hope to receive its cracked version download link in your email in few days from the day it was submitted.

NOTE:
A compulsory donation of 10 USD must be made via PayPal here, Payza or Bitcoin. For Payza and Bitcoin details, please, Contact Us here
You have seen and agreed to the T&C laid out here.
Your original uploaded file will be kept within ArykTECH for future references.

Now, adhere to the procedures laid out below here to upload your software. You must adhere strictly to the procedures else, your cracked version may be delayed or not delivered at all.

Step By Step Guides to Upload your Software

1. Using Notepad++ or any other text editor, create a text file. In the text file, contain the details as maybe seen in the picture below.
upload software detail

2. Download the setup of the software program you want cracked for you. If you have downloaded the software or already have a copy of it on your PC, skip this step and proceed to the next step.

3. Create a new folder on your PC and rename this folder to match with the software you want us crack for you.
Create folder for your crack software

4. Move both the software and the text file you created (in the step one above) into the same folder.
contain text file and software in the same folder

5. Compress/ZIP this folder using WinRAR or WinZIP. Make sure that both the software and the text file are contained within the ZIP file. Both .zip and .rar file formats are accepted.
zip both software and text file

6. Go to our Upload page here and upload the ZIP file.

7. Once your file is received, a notification email will immediately be sent to the email address contained in your attached text file.

If you have any questions, please, Contact Us here.

NCK Box Free Download: All Versions

If you have ever had the need to unlock a particular phone, either Network Unlock or SIM unlock, you may have heard of NCK BOX. NCK BOX is a super easy tool used for servicing phones. NCK BOX is used for flashing, unlocking (SIM or Network) series of smartphones including Samsung, HTC, Huawei, ZTE, Cubot, Coolpad, Micromax, BlackBerry only to mention a few from the huge list of phone brands supported by NCK Box. It is also used for writting IMEI, preserving and restoring EFS and also used to restoring service signals on smartphones that may have lost their service signals by any means.

Here, you will have access to download all versions of NCK BOX [cracked] versions. This list include those that are cracked by ArykTECH [me and the entire group] so, you can be sure that you are downloading the right NCK BOX crack versions completely *FREE for those that have access to the ABC Package folders on Mediafire and Mega.

Future versions of NCK BOX shall be cracked and added to the list as soon as they are ready for download.
CRACKED?
If you are worried by the word cracked and wonder what it means, it simply means that the same NCK BOX known to you has been modified to work without its BOX or Dongle. You can simply download it, install it and start using it. No setup registrations, BOX or DONGLE is required.

How to Network or SIM Unlock Phones Using NCK BOX

1. Download the latest NCK BOX from your ABC Package folder either on Mega or Mediafire. ABC Package is a special phone software repair kit that contains all phone software repair tools including firmwares, flashing and unlocking tools, video tutorials and the likes. For detailed info, see ABC Package page here.

2. Download and install Android USB Debugging and Fastboot drivers on your PC. For MTK Android devices, Install USB VCOM Drivers and SPD Android devices, Install SPD Android Drivers. You may also install PDanet+ or any other universal drivers for Android devices for a good standing.

3. Locate the NCK Box setup you downloaded from step one above. The setup is compressed in a ZIP file, simply decompress it and then, double-click the setup file to install it on your PC.

4. When the installation is complete, launch NCK Dongle/BOX. Preferably, it should be launched as Admin.

5. Now, on NCK Box, click on Unlocking tab. From the screen, under Phone Settings, click on the first box to select the Phone Brand you want to unlock. And from the second box, select the model of your smartphone e.g Samsung Galaxy S6 and proceed to the next step.

6. Now, enable USB Debugging Mode on your phone and connect it to the PC and then, wait until Windows detects the phone and installs the complete drivers.

7. NCK BOX can network or SIM unlock most phones in two (2) modes. Either Meta Mode or Flash Mode -the FLASH MODE is also known as Recovery Mode or Boot Mode for some. In any case, you will see the list of the modes that is/are supported by your device in the third (3rd) pane on NCK Box.

If your phone supports META Mode, you will see the option to reboot the phone to META MODE on NCK BOX. Click the button and NCK BOX will reboot your phone to META MODE otherwise, you will have to reboot your phone to either FASTBOOT MODE, RECOVERY MODE, FLASH MODE or BOOT MODE by yourself and this depends on the type and brand of phones you are holding.

8. Now, if after connecting the phone to the PC, NCK BOX displays 123456789, the default code, click Direct Unlock. This will unlock the phone straight away. If otherwise, click Read Info on NCK Box. This will read your connected device info and displays the Unlock Codes.

9. Now, disconnect your device from the PC and INSERT an UNSUPPORTED SIM CARD in it and reboot the device. When the device asks/prompts for the Unlock Code, enter the Unlock Code generated by NCK BOX and press OK.

10. Now, your device is successfully Network/SIM Unlocked. NOTE: if the unlock was not done, factory reset the phone and restart the process again.

NOTICE:
1. This tutorial complies ONLY with the latest NCK BOX thus, from 2.5.X.X and beyond.
2. This tutorial is generalized thus, it is streamlined to work with all devices. If you want specific tutorial for specific devices check:
3. To have access to the ABC Package folder, a compulsory donation of 20USD is required via PayPal, Bitcoin, Payza or Payoneer. For Bitcoin and Payoneer details, please Contact Us here.
4. Have a software you want us crack for you? Submit it here.

Xolo Omega 5.0 Stock Firmware, Stock ROM Download

Xolo Android Stock ROM Firmware PAC File
This Xolo_Omega_5.0S035_09032015 Firmware, Stock ROM file can be used with any service tools capable of Flashing Stock ROM file on Xolo Android devices.
Stock firmware are mostly needed to either upgrade your Xolo Omega 5.0, downgrade it or, to simply flash the phone to correct certain software issues or malfunctions on the phone. Here on this page I have contained the download link for the complete Xolo Omega 5.0, Stock ROM file which can be used to flash factory OS back to your Xolo Omega 5.0.

How to Download Stock Firmware and Flash Xolo Omega 5.0 with the Stock ROM

1. Download SP Flash Tool from here and install it on your PC. If you don't have MTK Android drivers installed on your PC yet, you must install it too. Download VCOM Drivers here

2. Download your Xolo Omega 5.0 firmware, Stock ROM File from here.

3. Open the SP Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate flash_tool.exe application and then; double-click it to lunch the program.

4. Go to the folder where you downloaded the Xolo Omega 5.0 Stock ROM and open it. It is compressed in a ZIP File, simply decompress/unzip it onto a folder on your PC.

5. On SP Flash Tool, select Scatter Loading. A window should open. Using the browse button, navigate to the folder where you unzipped the Xolo Omega 5.0 stock ROM and then select "MTXXXX-ANDROID-SCATTER", from there. Remember: "xxxx" refers to the MTK version of your phone.

6. Once selected, SP Flash Tool will load all the partitions in the Xolo Omega 5.0 stock ROM you downloaded. From the list, mark all the partitions EXCEPT these three (3): Preloader, UserData and CACHE.

7. Now, select Download on SP Flash Tool.

8. Put off your Xolo Omega 5.0 or remove battery from it and re-insert the battery again. Connect your Xolo Omega 5.0 Mobile Phone to the PC and then tap the Power button once.

9. For few seconds, your Windows PC will install the necessary drivers for the flashing operation and then, the flashing operation will commence promptly.

10. When the flashing operation completes, SP Flash Tool will display a green PASS circle. You may then disconnect your phone from the PC.
CONGRATULATIONS! You have successfully flashed your Xolo Omega 5.0 to its factory defaults.
NOTE: if you encounter any errors while flashing your Xolo Omega 5.0 using SP Flash Tools, see here: Solutions to All SP Flash Tools Errors: Practical Guides

For Graphical Illustrations on how to flash Xolo android devices, see here: How to Flash Xolo Android Device: Step by Step with Pictures

Also Read:

Video Tutorial: How to Flash All MTK Android Devices Including Xolo Omega 5.0



Kenxinda K9200 [SC6820] Stock Firmware, Flash File Download

Kenxinda Android Stock ROM Firmware PAC File
This Kenxinda K9200 [SC6820] Firmware, PAC file can be used with any service tools capable of Flashing PAC file on SpreadTRUM Android Devices.
Stock firmware are mostly needed to either upgrade or downgrade your Kenxinda K9200 [SC6820]. It can also be needed to simply flash your Kenxinda android device in order to correct certain software issues or malfunctions on the phone. Here on this page I have contained the download link for the complete Kenxinda K9200 [SC6820] Stock ROM, PAC file which can be used to flash factory OS back to your Kenxinda K9200 [SC6820].

How to Download Latest Firmware and Flash Kenxinda K9200 [SC6820] with this PAC File

1. Download SPD Download Tool from here and install it on your PC. Also, it is a must to install SpreadTRUM Android drivers on your PC. You may Download SpreadTRUM Android Drivers here

2. Download your Kenxinda K9200 [SC6820], latest firmware pac File from here.

3. Open the SpreadTRUM Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate the SpreadTRUM Upgrade Tool application and then; double-click it to lunch the program.

4. Now, Put off your Kenxinda K9200 [SC6820] or remove battery from it and re-insert the battery then, connect your Kenxinda K9200 [SC6820] Mobile Phone to the PC.

5. Now, select the specific STOCK FIRMWARE you downloaded for your Kenxinda K9200 [SC6820] android device by clicking on the Select Pack icon.

6: As soon as the file is loaded successfully, click on "Download Button" to commence the flashing operation.
NOTE: During the flashing operation, your phone may reboot once or twice. Just leave it and do not interrupt the operation.

7: Once the flashing operation is successfully completed, you will see "Previous Passed" message displayed in green on the SpreadTRUM Flash Tool.
CONGRATULATIONS! You have now successfully flashed your Kenxinda K9200 [SC6820] android device.

For Graphical Illustration on how to flash Kenxinda SpreadTRUM android devices, see here: How to Flash Kenxinda Android Device: Step by Step with Pictures

Also Read:

Xolo Omega 5.5 Stock Firmware, Stock ROM Download

Xolo Android Stock ROM Firmware PAC File
This Xolo_Omega_5.5_S016_06012015 Firmware, Stock ROM file can be used with any service tools capable of Flashing Stock ROM file on Xolo Android devices.
Stock firmware are mostly needed to either upgrade your Xolo Omega 5.5, downgrade it or, to simply flash the phone to correct certain software issues or malfunctions on the phone. Here on this page I have contained the download link for the complete Xolo Omega 5.5, Stock ROM file which can be used to flash factory OS back to your Xolo Omega 5.5.

How to Download Stock Firmware and Flash Xolo Omega 5.5 with the Stock ROM

1. Download SP Flash Tool from here and install it on your PC. If you don't have MTK Android drivers installed on your PC yet, you must install it too. Download VCOM Drivers here

2. Download your Xolo Omega 5.5 firmware, Stock ROM File from here.

3. Open the SP Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate flash_tool.exe application and then; double-click it to lunch the program.

4. Go to the folder where you downloaded the Xolo Omega 5.5 Stock ROM and open it. It is compressed in a ZIP File, simply decompress/unzip it onto a folder on your PC.

5. On SP Flash Tool, select Scatter Loading. A window should open. Using the browse button, navigate to the folder where you unzipped the Xolo Omega 5.5 stock ROM and then select "MTXXXX-ANDROID-SCATTER", from there. Remember: "xxxx" refers to the MTK version of your phone.

6. Once selected, SP Flash Tool will load all the partitions in the Xolo Omega 5.5 stock ROM you downloaded. From the list, mark all the partitions EXCEPT these three (3): Preloader, UserData and CACHE.

7. Now, select Download on SP Flash Tool.

8. Put off your Xolo Omega 5.5 or remove battery from it and re-insert the battery again. Connect your Xolo Omega 5.5 Mobile Phone to the PC and then tap the Power button once.

9. For few seconds, your Windows PC will install the necessary drivers for the flashing operation and then, the flashing operation will commence promptly.

10. When the flashing operation completes, SP Flash Tool will display a green PASS circle. You may then disconnect your phone from the PC.
CONGRATULATIONS! You have successfully flashed your Xolo Omega 5.5 to its factory defaults.
NOTE: if you encounter any errors while flashing your Xolo Omega 5.5 using SP Flash Tools, see here: Solutions to All SP Flash Tools Errors: Practical Guides

For Graphical Illustrations on how to flash Xolo android devices, see here: How to Flash Xolo Android Device: Step by Step with Pictures

Also Read:

Video Tutorial: How to Flash All MTK Android Devices Including Xolo Omega 5.5



Kenxinda K9300 [SC8810] Stock Firmware, Flash File Download

Kenxinda Android Stock ROM Firmware PAC File
This Kenxinda K9300 [SC8810] v0.2 Firmware, PAC file can be used with any service tools capable of Flashing PAC file on SpreadTRUM Android Devices.
Stock firmware are mostly needed to either upgrade or downgrade your Kenxinda K9300 [SC8810]. It can also be needed to simply flash your Kenxinda android device in order to correct certain software issues or malfunctions on the phone. Here on this page I have contained the download link for the complete Kenxinda K9300 [SC8810] Stock ROM, PAC file which can be used to flash factory OS back to your Kenxinda K9300 [SC8810].

How to Download Latest Firmware and Flash Kenxinda K9300 [SC8810] with this PAC File

1. Download SPD Download Tool from here and install it on your PC. Also, it is a must to install SpreadTRUM Android drivers on your PC. You may Download SpreadTRUM Android Drivers here

2. Download your Kenxinda K9300 [SC8810], latest firmware pac File from here.

3. Open the SpreadTRUM Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate the SpreadTRUM Upgrade Tool application and then; double-click it to lunch the program.

4. Now, Put off your Kenxinda K9300 [SC8810] or remove battery from it and re-insert the battery then, connect your Kenxinda K9300 [SC8810] Mobile Phone to the PC.

5. Now, select the specific STOCK FIRMWARE you downloaded for your Kenxinda K9300 [SC8810] android device by clicking on the Select Pack icon.

6: As soon as the file is loaded successfully, click on "Download Button" to commence the flashing operation.
NOTE: During the flashing operation, your phone may reboot once or twice. Just leave it and do not interrupt the operation.

7: Once the flashing operation is successfully completed, you will see "Previous Passed" message displayed in green on the SpreadTRUM Flash Tool.
CONGRATULATIONS! You have now successfully flashed your Kenxinda K9300 [SC8810] android device.

For Graphical Illustration on how to flash Kenxinda SpreadTRUM android devices, see here: How to Flash Kenxinda Android Device: Step by Step with Pictures

Also Read:

Xolo Q520s Stock Firmware, Stock ROM Download

Xolo Android Stock ROM Firmware PAC File
This Xolo_Q520s_S007_11112014 Firmware, Stock ROM file can be used with any service tools capable of Flashing Stock ROM file on Xolo Android devices.
Stock firmware are mostly needed to either upgrade your Xolo Q520s, downgrade it or, to simply flash the phone to correct certain software issues or malfunctions on the phone. Here on this page I have contained the download link for the complete Xolo Q520s, Stock ROM file which can be used to flash factory OS back to your Xolo Q520s.

How to Download Stock Firmware and Flash Xolo Q520s with the Stock ROM

1. Download SP Flash Tool from here and install it on your PC. If you don't have MTK Android drivers installed on your PC yet, you must install it too. Download VCOM Drivers here

2. Download your Xolo Q520s firmware, Stock ROM File from here.

3. Open the SP Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate flash_tool.exe application and then; double-click it to lunch the program.

4. Go to the folder where you downloaded the Xolo Q520s Stock ROM and open it. It is compressed in a ZIP File, simply decompress/unzip it onto a folder on your PC.

5. On SP Flash Tool, select Scatter Loading. A window should open. Using the browse button, navigate to the folder where you unzipped the Xolo Q520s stock ROM and then select "MTXXXX-ANDROID-SCATTER", from there. Remember: "xxxx" refers to the MTK version of your phone.

6. Once selected, SP Flash Tool will load all the partitions in the Xolo Q520s stock ROM you downloaded. From the list, mark all the partitions EXCEPT these three (3): Preloader, UserData and CACHE.

7. Now, select Download on SP Flash Tool.

8. Put off your Xolo Q520s or remove battery from it and re-insert the battery again. Connect your Xolo Q520s Mobile Phone to the PC and then tap the Power button once.

9. For few seconds, your Windows PC will install the necessary drivers for the flashing operation and then, the flashing operation will commence promptly.

10. When the flashing operation completes, SP Flash Tool will display a green PASS circle. You may then disconnect your phone from the PC.
CONGRATULATIONS! You have successfully flashed your Xolo Q520s to its factory defaults.
NOTE: if you encounter any errors while flashing your Xolo Q520s using SP Flash Tools, see here: Solutions to All SP Flash Tools Errors: Practical Guides

For Graphical Illustrations on how to flash Xolo android devices, see here: How to Flash Xolo Android Device: Step by Step with Pictures

Also Read:

Video Tutorial: How to Flash All MTK Android Devices Including Xolo Q520s



Kenxinda K9300 [SC6820] Stock Firmware, Flash File Download

Kenxinda Android Stock ROM Firmware PAC File
This Kenxinda K9300_SC6820_V0.02_20131223 Firmware, PAC file can be used with any service tools capable of Flashing PAC file on SpreadTRUM Android Devices.
Stock firmware are mostly needed to either upgrade or downgrade your Kenxinda K9300 [SC6820]. It can also be needed to simply flash your Kenxinda android device in order to correct certain software issues or malfunctions on the phone. Here on this page I have contained the download link for the complete Kenxinda K9300 [SC6820] Stock ROM, PAC file which can be used to flash factory OS back to your Kenxinda K9300 [SC6820].

How to Download Latest Firmware and Flash Kenxinda K9300 [SC6820] with this PAC File

1. Download SPD Download Tool from here and install it on your PC. Also, it is a must to install SpreadTRUM Android drivers on your PC. You may Download SpreadTRUM Android Drivers here

2. Download your Kenxinda K9300 [SC6820], latest firmware pac File from here.

3. Open the SpreadTRUM Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate the SpreadTRUM Upgrade Tool application and then; double-click it to lunch the program.

4. Now, Put off your Kenxinda K9300 [SC6820] or remove battery from it and re-insert the battery then, connect your Kenxinda K9300 [SC6820] Mobile Phone to the PC.

5. Now, select the specific STOCK FIRMWARE you downloaded for your Kenxinda K9300 [SC6820] android device by clicking on the Select Pack icon.

6: As soon as the file is loaded successfully, click on "Download Button" to commence the flashing operation.
NOTE: During the flashing operation, your phone may reboot once or twice. Just leave it and do not interrupt the operation.

7: Once the flashing operation is successfully completed, you will see "Previous Passed" message displayed in green on the SpreadTRUM Flash Tool.
CONGRATULATIONS! You have now successfully flashed your Kenxinda K9300 [SC6820] android device.

For Graphical Illustration on how to flash Kenxinda SpreadTRUM android devices, see here: How to Flash Kenxinda Android Device: Step by Step with Pictures

Also Read:

Xolo Q600 Club Stock Firmware, Stock ROM Download

Xolo Android Stock ROM Firmware PAC File
This Xolo_Q600_Club_S009 Firmware, Stock ROM file can be used with any service tools capable of Flashing Stock ROM file on Xolo Android devices.
Stock firmware are mostly needed to either upgrade your Xolo Q600 Club, downgrade it or, to simply flash the phone to correct certain software issues or malfunctions on the phone. Here on this page I have contained the download link for the complete Xolo Q600 Club, Stock ROM file which can be used to flash factory OS back to your Xolo Q600 Club.

How to Download Stock Firmware and Flash Xolo Q600 Club with the Stock ROM

1. Download SP Flash Tool from here and install it on your PC. If you don't have MTK Android drivers installed on your PC yet, you must install it too. Download VCOM Drivers here

2. Download your Xolo Q600 Club firmware, Stock ROM File from here.

3. Open the SP Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate flash_tool.exe application and then; double-click it to lunch the program.

4. Go to the folder where you downloaded the Xolo Q600 Club Stock ROM and open it. It is compressed in a ZIP File, simply decompress/unzip it onto a folder on your PC.

5. On SP Flash Tool, select Scatter Loading. A window should open. Using the browse button, navigate to the folder where you unzipped the Xolo Q600 Club stock ROM and then select "MTXXXX-ANDROID-SCATTER", from there. Remember: "xxxx" refers to the MTK version of your phone.

6. Once selected, SP Flash Tool will load all the partitions in the Xolo Q600 Club stock ROM you downloaded. From the list, mark all the partitions EXCEPT these three (3): Preloader, UserData and CACHE.

7. Now, select Download on SP Flash Tool.

8. Put off your Xolo Q600 Club or remove battery from it and re-insert the battery again. Connect your Xolo Q600 Club Mobile Phone to the PC and then tap the Power button once.

9. For few seconds, your Windows PC will install the necessary drivers for the flashing operation and then, the flashing operation will commence promptly.

10. When the flashing operation completes, SP Flash Tool will display a green PASS circle. You may then disconnect your phone from the PC.
CONGRATULATIONS! You have successfully flashed your Xolo Q600 Club to its factory defaults.
NOTE: if you encounter any errors while flashing your Xolo Q600 Club using SP Flash Tools, see here: Solutions to All SP Flash Tools Errors: Practical Guides

For Graphical Illustrations on how to flash Xolo android devices, see here: How to Flash Xolo Android Device: Step by Step with Pictures

Also Read:

Video Tutorial: How to Flash All MTK Android Devices Including Xolo Q600 Club



Kenxinda Metro 1001 Stock Firmware, Flash File Download

Kenxinda Android Stock ROM Firmware PAC File
This Kenxinda_Metro_1001_k150103_T350h9_0204_3.5TD Firmware, PAC file can be used with any service tools capable of Flashing PAC file on SpreadTRUM Android Devices.
Stock firmware are mostly needed to either upgrade or downgrade your Kenxinda Metro 1001. It can also be needed to simply flash your Kenxinda android device in order to correct certain software issues or malfunctions on the phone. Here on this page I have contained the download link for the complete Kenxinda Metro 1001 Stock ROM, PAC file which can be used to flash factory OS back to your Kenxinda Metro 1001.

How to Download Latest Firmware and Flash Kenxinda Metro 1001 with this PAC File

1. Download SPD Download Tool from here and install it on your PC. Also, it is a must to install SpreadTRUM Android drivers on your PC. You may Download SpreadTRUM Android Drivers here

2. Download your Kenxinda Metro 1001, latest firmware pac File from here.

3. Open the SpreadTRUM Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate the SpreadTRUM Upgrade Tool application and then; double-click it to lunch the program.

4. Now, Put off your Kenxinda Metro 1001 or remove battery from it and re-insert the battery then, connect your Kenxinda Metro 1001 Mobile Phone to the PC.

5. Now, select the specific STOCK FIRMWARE you downloaded for your Kenxinda Metro 1001 android device by clicking on the Select Pack icon.

6: As soon as the file is loaded successfully, click on "Download Button" to commence the flashing operation.
NOTE: During the flashing operation, your phone may reboot once or twice. Just leave it and do not interrupt the operation.

7: Once the flashing operation is successfully completed, you will see "Previous Passed" message displayed in green on the SpreadTRUM Flash Tool.
CONGRATULATIONS! You have now successfully flashed your Kenxinda Metro 1001 android device.

For Graphical Illustration on how to flash Kenxinda SpreadTRUM android devices, see here: How to Flash Kenxinda Android Device: Step by Step with Pictures

Also Read:

Xolo Q710s Stock Firmware, Stock ROM Download

Xolo Android Stock ROM Firmware PAC File
This Xolo_Q710s_S111_15092014 Firmware, Stock ROM file can be used with any service tools capable of Flashing Stock ROM file on Xolo Android devices.
Stock firmware are mostly needed to either upgrade your Xolo Q710s, downgrade it or, to simply flash the phone to correct certain software issues or malfunctions on the phone. Here on this page I have contained the download link for the complete Xolo Q710s, Stock ROM file which can be used to flash factory OS back to your Xolo Q710s.

How to Download Stock Firmware and Flash Xolo Q710s with the Stock ROM

1. Download SP Flash Tool from here and install it on your PC. If you don't have MTK Android drivers installed on your PC yet, you must install it too. Download VCOM Drivers here

2. Download your Xolo Q710s firmware, Stock ROM File from here.

3. Open the SP Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate flash_tool.exe application and then; double-click it to lunch the program.

4. Go to the folder where you downloaded the Xolo Q710s Stock ROM and open it. It is compressed in a ZIP File, simply decompress/unzip it onto a folder on your PC.

5. On SP Flash Tool, select Scatter Loading. A window should open. Using the browse button, navigate to the folder where you unzipped the Xolo Q710s stock ROM and then select "MTXXXX-ANDROID-SCATTER", from there. Remember: "xxxx" refers to the MTK version of your phone.

6. Once selected, SP Flash Tool will load all the partitions in the Xolo Q710s stock ROM you downloaded. From the list, mark all the partitions EXCEPT these three (3): Preloader, UserData and CACHE.

7. Now, select Download on SP Flash Tool.

8. Put off your Xolo Q710s or remove battery from it and re-insert the battery again. Connect your Xolo Q710s Mobile Phone to the PC and then tap the Power button once.

9. For few seconds, your Windows PC will install the necessary drivers for the flashing operation and then, the flashing operation will commence promptly.

10. When the flashing operation completes, SP Flash Tool will display a green PASS circle. You may then disconnect your phone from the PC.
CONGRATULATIONS! You have successfully flashed your Xolo Q710s to its factory defaults.
NOTE: if you encounter any errors while flashing your Xolo Q710s using SP Flash Tools, see here: Solutions to All SP Flash Tools Errors: Practical Guides

For Graphical Illustrations on how to flash Xolo android devices, see here: How to Flash Xolo Android Device: Step by Step with Pictures

Also Read:

Video Tutorial: How to Flash All MTK Android Devices Including Xolo Q710s



Kenxinda Star 5001 Stock Firmware, Flash File Download

Kenxinda Android Stock ROM Firmware PAC File
This Kenxinda_Star_5001_20150124 Firmware, PAC file can be used with any service tools capable of Flashing PAC file on SpreadTRUM Android Devices.
Stock firmware are mostly needed to either upgrade or downgrade your Kenxinda Star 5001. It can also be needed to simply flash your Kenxinda android device in order to correct certain software issues or malfunctions on the phone. Here on this page I have contained the download link for the complete Kenxinda Star 5001 Stock ROM, PAC file which can be used to flash factory OS back to your Kenxinda Star 5001.

How to Download Latest Firmware and Flash Kenxinda Star 5001 with this PAC File

1. Download SPD Download Tool from here and install it on your PC. Also, it is a must to install SpreadTRUM Android drivers on your PC. You may Download SpreadTRUM Android Drivers here

2. Download your Kenxinda Star 5001, latest firmware pac File from here.

3. Open the SpreadTRUM Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate the SpreadTRUM Upgrade Tool application and then; double-click it to lunch the program.

4. Now, Put off your Kenxinda Star 5001 or remove battery from it and re-insert the battery then, connect your Kenxinda Star 5001 Mobile Phone to the PC.

5. Now, select the specific STOCK FIRMWARE you downloaded for your Kenxinda Star 5001 android device by clicking on the Select Pack icon.

6: As soon as the file is loaded successfully, click on "Download Button" to commence the flashing operation.
NOTE: During the flashing operation, your phone may reboot once or twice. Just leave it and do not interrupt the operation.

7: Once the flashing operation is successfully completed, you will see "Previous Passed" message displayed in green on the SpreadTRUM Flash Tool.
CONGRATULATIONS! You have now successfully flashed your Kenxinda Star 5001 android device.

For Graphical Illustration on how to flash Kenxinda SpreadTRUM android devices, see here: How to Flash Kenxinda Android Device: Step by Step with Pictures

Also Read:

Xolo A1000s Lite Stock Firmware, Stock ROM Download

Xolo Android Stock ROM Firmware PAC File
This Xolo_A1000s_Lite_S002_27082014 Firmware, Stock ROM file can be used with any service tools capable of Flashing Stock ROM file on Xolo Android devices.
Stock firmware are mostly needed to either upgrade your Xolo A1000s Lite, downgrade it or, to simply flash the phone to correct certain software issues or malfunctions on the phone. Here on this page I have contained the download link for the complete Xolo A1000s Lite, Stock ROM file which can be used to flash factory OS back to your Xolo A1000s Lite.

How to Download Stock Firmware and Flash Xolo A1000s Lite with the Stock ROM

1. Download SP Flash Tool from here and install it on your PC. If you don't have MTK Android drivers installed on your PC yet, you must install it too. Download VCOM Drivers here

2. Download your Xolo A1000s Lite firmware, Stock ROM File from here.

3. Open the SP Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate flash_tool.exe application and then; double-click it to lunch the program.

4. Go to the folder where you downloaded the Xolo A1000s Lite Stock ROM and open it. It is compressed in a ZIP File, simply decompress/unzip it onto a folder on your PC.

5. On SP Flash Tool, select Scatter Loading. A window should open. Using the browse button, navigate to the folder where you unzipped the Xolo A1000s Lite stock ROM and then select "MTXXXX-ANDROID-SCATTER", from there. Remember: "xxxx" refers to the MTK version of your phone.

6. Once selected, SP Flash Tool will load all the partitions in the Xolo A1000s Lite stock ROM you downloaded. From the list, mark all the partitions EXCEPT these three (3): Preloader, UserData and CACHE.

7. Now, select Download on SP Flash Tool.

8. Put off your Xolo A1000s Lite or remove battery from it and re-insert the battery again. Connect your Xolo A1000s Lite Mobile Phone to the PC and then tap the Power button once.

9. For few seconds, your Windows PC will install the necessary drivers for the flashing operation and then, the flashing operation will commence promptly.

10. When the flashing operation completes, SP Flash Tool will display a green PASS circle. You may then disconnect your phone from the PC.
CONGRATULATIONS! You have successfully flashed your Xolo A1000s Lite to its factory defaults.
NOTE: if you encounter any errors while flashing your Xolo A1000s Lite using SP Flash Tools, see here: Solutions to All SP Flash Tools Errors: Practical Guides

For Graphical Illustrations on how to flash Xolo android devices, see here: How to Flash Xolo Android Device: Step by Step with Pictures

Also Read:

Video Tutorial: How to Flash All MTK Android Devices Including Xolo A1000s Lite



الاشتراك في: الرسائل (Atom)