Tecno P5 Plus Stock Firmware, Stock ROM Download: All Variants

These Tecno P5 Plus Firmware, Stock ROM file can be used with any service tools capable of Flashing Stock ROM file on Tecno Android devices.
Stock firmware are mostly needed to either upgrade your Tecno P5 Plus or flash the phone to correct certain software issues or malfunctions on the phone. Here on this page I have contained the download links for all the complete Tecno P5 Plus, Stock ROM files which can be used to flash factory OS back to your Tecno P5 Plus.

How to Download Stock Firmware and Flash Tecno P5 Plus with these Stock Firmwares/ROM

1. Download SP Flash Tool from here and install it on your PC. If you don't have MTK Android drivers installed on your PC yet, you must install it too. Download VCOM Drivers here

2. Download the appropriate variant of Tecno P5 Plus Firmware from the list below:
Download 1st Variant
Download 2nd Variant

3. Open the SP Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate flash_tool.exe application and then; double-click it to lunch the program.

4. Go to the folder where you downloaded the Tecno P5 Plus Stock ROM and open it. It is compressed in a ZIP File, simply decompress/unzip it onto a folder on your PC.

5. On SP Flash Tool, select Scatter Loading. A window should open. Using the browse button, navigate to the folder where you unzipped the Tecno P5 Plus stock ROM and then select "MTXXXX-ANDROID-SCATTER", from there. Remember: "xxxx" refers to the MTK version of your phone.

6. Once selected, SP Flash Tool will load all the partitions in the Tecno P5 Plus stock ROM you downloaded. From the list, mark all the partitions EXCEPT these three (3): Preloader, UserData and CACHE.

7. Now, select Download on SP Flash Tool.

8. Put off your Tecno P5 Plus or remove battery from it and re-insert the battery again. Connect your Tecno P5 Plus Mobile Phone to the PC and then tap the Power button once.

9. For few seconds, your Windows PC will install the necessary drivers for the flashing operation and then, the flashing operation will commence promptly.

10. When the flashing operation completes, SP Flash Tool will display a green PASS circle. You may then disconnect your phone from the PC.
CONGRATULATIONS! You have successfully flashed your Tecno P5 Plus to its factory defaults.

For Graphical Illustrations on how to flash Tecno android devices, see here: How to Flash Tecno Android Device: Step by Step with Pictures

Also Read:

Video Tutorial: How to Flash All MTK Android Devices Including Tecno P5 Plus